Billy Goat F012507A User Manual download pdf (Page 13)

Form No F012507A 13 Part No 840186

MV650H PUSH Vacuum Owner’s Manual

OPERATOR CONTROLS

The operator’s position is at the rear of the machine between the handlebars. The operator should STAND in a

position to allow both handlebars to be grasped firmly, which allows sufficient leverage to steer the machine.

Operator’s controls are shown below.

Operator Control Locations

1 Nozzle Door Adjuster 4 Throttle Control

2 Bag Latch

3 Pull Starter

STARTING

CHECK engine oil level before operating machine.

1. Place equipment on a level, firm surface that is free of rocks or other debris.

2. Place throttle in CHOKE position.

Throttle

DO NOT START equipment without the debris bag in place.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Billy Goat F012507A User Manual Page 13