Billy-goat VQ802SPH User Manual download pdf (Page 13)

Part No. 830542 Form No. F021302G

Page 13 of 16

OPERATION continued

Do not lift by hand. Use loading ramps or other mechanical assis-

tance. Secure in place during transport.

16.4

HANDLING & TRANSPORTING:

Never store engine indoors or in enclosed poorly venti-

lated areas with fuel in tank, where fuel fumes may reach an

open flame, spark or pilot light, as on a furnace, water heater,

clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as

follows:

Be sure engine is cool. Do not smoke. Remove all

gasoline from carburetor and fuel tank to prevent gum deposits

from forming on these parts and causing possible malfunction of

engine. Drain fuel outdoors, into an approved container, away

from open flame. Run engine until fuel tank is empty and

engine runs out of gasoline.

16.5 STORAGE

See DEBRIS BAG on page 6.16.3

Diverter rod must

be in this position

for normal pickup.

Curb Guide

Rollers.

2" Front Guide

Wheels adjust

nozzle height to

keep it raised just

above cleaning

surface.

33" (838 mm)

wide nozzle.

Casters - 8" (203 mm)

Dia. semi-pnuematic

tires with ball bearing

swivel.

Rear Wheels - Turf

Tread 13" Dia. x 6.5"

(330 mm x 165 mm)

wide pnuematic.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable

alternative in minimizing the formation of fuel gum deposits

during storage. Add stabilizer to gasoline in fuel tank or storage

container. Always follow mix ratio found on stabilizer container.

Run engine at least 10 min. after adding stabilizer to allow it to

reach the carburetor.

1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Billy-goat VQ802SPH User Manual Page 13

Comments to this Manuals

Related products and manuals for Vacuums Billy-goat VQ802SPH